V-TWIN MANUFACTURING 34-0410 Intake Clamp Set 78-84 35-0410

( Brand: V-twin Manufacturing ), ( Manufacturer Part Number: 34-0410 ), ( Part Type: Intake Clamp )

Review V TWIN MANUFACTURING Harley Intake Clamp Set Chrome Xl 78-84 fits IRONHEAD FL

The **V-Twin 34-0410 Harley-Davidson Ironhead Intake Clamp Set (FL XL 1978 1984, part number 35-0410)** is a meticulously crafted aftermarket component designed to restore and enhance the performance of Harley-Davidson s legendary Ironhead engine, specifically for the FLXL models produced between 1978 and 1984. This clamp set replaces the stock intake manifold clamps, which are notorious for wearing out over time due to the constant heat, vibration, and stress of high-performance riding or even normal operation. The original clamps, often made from brittle metal or plastic, can crack, warp, or fail entirely, leading to leaks at critical gaskets and compromising engine efficiency, throttle response, and overall reliability. The 34-0410 clamp set addresses these issues with a robust, high-quality alternative engineered to withstand the demands of both daily cruising and aggressive tuning.

Constructed from durable, heat-resistant materials likely forged steel or a high-grade aluminum alloy these clamps are designed to maintain a secure, airtight seal around the intake manifold, carburetor, and other connected components. Unlike the stock clamps, which may loosen or corrode over time, these aftermarket clamps feature a tight, interference-fit design with serrated edges that dig into the manifold flanges, preventing slippage and ensuring a consistent, vibration-dampening grip. The set includes all necessary clamps to cover the primary intake connections, including those for the carburetor (often a Holley or Amal), the vacuum lines, and the intake manifold itself, providing a comprehensive upgrade that eliminates common leakage points. This attention to detail not only improves engine performance by maintaining proper vacuum levels and airflow but also reduces the risk of carbon buildup and intake restriction, which can plague older Harley engines.

For enthusiasts and mechanics working on Ironhead restorations or performance builds, this clamp set is an essential upgrade that bridges the gap between stock reliability and aftermarket modifications. Whether you're preparing the engine for a carburetor swap, a high-flow intake manifold, or simply a thorough rebuild, the 34-0410 clamps ensure that every connection remains tight and secure. Their compatibility with the 35-0410 intake manifold (and similar configurations) makes them a straightforward, bolt-on solution that doesn t require extensive modification or alignment. Additionally, the improved clamping force helps mitigate the risk of gasket failure, which can lead to costly internal damage if vacuum leaks allow unmetered air into the engine. Beyond functionality, these clamps also contribute to the aesthetic integrity of the build, offering a cleaner, more polished look compared to the often rusted or degraded stock parts. Whether you're a seasoned mechanic or a weekend warrior tackling your first Ironhead project, the V-Twin 34-0410 clamp set is a small but significant investment in the longevity and performance of your classic Harley-Davidson.

### **Pros and Cons of buying a Harley-Davidson V-Twin (34-0410 / 35-0410) Ironhead Intake Clamp Set (1978-1984 XL)**

1. **Direct OEM Replacement** This clamp set is a genuine Harley-Davidson part, ensuring a perfect fit for 1978 1984 XL models with the Ironhead engine. It eliminates the need for modification or aftermarket adjustments.

2. **Reliability** Harley s OEM components are built to last, reducing the risk of premature failure compared to lower-quality aftermarket alternatives.

3. **Ease of Installation** Since it s a direct replacement, installation is straightforward, requiring minimal tools and expertise. No custom machining or alignment issues should arise.

4. **Compatibility with Stock Engines** Works seamlessly with the original intake manifold setup, making it ideal for restorations or maintenance without altering the engine s character.

5. **Support for Classic Engines** If you re preserving or restoring an Ironhead, these clamps help maintain the bike s original integrity, which is valuable for collectors and enthusiasts.

6. **Warranty Coverage** Purchasing from an authorized dealer or reputable seller may include a warranty, offering peace of mind against defects.

7. **Avoids Common Failure Points** The intake clamps are a wear-prone area on older Harleys, and replacing them prevents leaks, vacuum loss, or carburetor performance issues.

1. **Cost** OEM Harley parts can be expensive, especially for older models. The price may be higher than aftermarket alternatives, though quality may justify it.

2. **Limited Availability** Finding these parts may require ordering from specialty dealers, which could involve shipping delays or higher costs.

3. **No Performance Gains** Unlike aftermarket intake manifolds or clamps designed for improved airflow, these are purely functional replacements. If you re seeking power increases, this part won t help.

4. **Potential for Rust or Wear** Even OEM parts from older stock may show signs of rust or wear, requiring cleaning or replacement of gaskets/seals.

5. **Mixed Condition in Used Market** If buying used, there s a risk of purchasing clamps that have been previously damaged or improperly stored, reducing their lifespan.

6. **Not Future-Proof** If you plan to modify the engine (e.g., big bore, high-performance carburetors), these clamps may not be ideal, as they re designed for stock applications.

---

### **Conclusion**

The **Harley-Davidson 34-0410 / 35-0410 Ironhead intake clamp set** is a **highly recommended purchase** if you prioritize **authenticity, reliability, and ease of installation** for your 1978 1984 XL. It s the best choice for restorations, maintenance, or preserving the bike s original character. However, if budget is a concern or you re open to aftermarket options, you may explore alternatives though they risk compromising fit or longevity.

- **Buy new from an authorized Harley dealer or trusted parts supplier** to ensure quality and warranty coverage.

- **Inspect for rust or damage** if purchasing used, and replace gaskets/seals as needed.

- **Pair with a carburetor tune-up** to maximize performance after installation.

- **Avoid aftermarket clamps** unless you re certain they re designed for your specific engine configuration.

For most owners, the **OEM clamps are worth the investment** for long-term reliability and peace of mind. If you re on a tight budget, weigh the cost against the risk of failure with cheaper alternatives but be prepared for potential issues down the line.

Details:

Fits Harley FL 1978 1984 XL Ironhead Verify intake before purchase. Chrome Intake Manifold Clamp Set, V-Twin Part # 35-0410, Aftermarket replacement clamp set for late Ironhead model's.

part #: 340410 prices

• $25.99-$65.96

specifications intakefuelmotorcycle:

• for models: Fl, Ironhead
• for makes: Harley
• brand: V-twin Manufacturing
• mpn: 34-0410
• part type: Intake Clamp

seller intakefuelmotorcycle:

• rating: 100.0%
• # reviews: 291
• city: Cape Coral, Florida

shipping intakefuelmotorcycle:

• transit: 4-9 Days
• cost: $0.00
• service: USPS Ground Advantage
• carrier: USPS
• class: Standard
• type: Calculated

general intakefuelmotorcycle:

• Motorcycle Scooter Parts Accessories > Air Intake Fuel Delivery > Other Air Intake Fuel Delivery
• condition: New other see details

returns intakefuelmotorcycle:

• policy: No Returns

offer intakefuelmotorcycle:

• availability: In Stock
• sold: 0
• quantity: 1
• started: February 22, 2026
• options: Ship-to-home
• best offers: True

payments intakefuelmotorcycle:

• money order
• other
• wallet: Google-pay
• credit card: Mastercard

V-twin Manufacturing 34-0410 Is Similar To:

• 0206-2049-ch Performance Machine Chrome Fast Air Cleaner For 1993-2012 Harley Big Twin (24.3% similar) Fast air intake solution this item fits big twin w CV carb twin cam w Delphi efi except touring the most innovative and aggressive looking forward facing air intake on the market features an internal crank case breather system n filter element allows for a significant horsepower increase over stock ...(October 8th, 2015)
• Manifold Intake 04-6114 Twin Power Kit Seal (31.4% similar) Contact through messaging...(August 6th, 2014)
• 1055918 Twin Manufacturing Universal Straight Line Union Mounting Hole Mfg (32% similar) Use for oil, brake, fuel plumbing. Brand new line union part from v twin mfg chrome...(February 16th, 2019)
• 11-0679 V-twin Nitrate Intake And (17.2% similar) Nitrate intake and exhaust valve set sifting includes 2 valves. Fits:fl 1966 -1984FLT 1979 -1983FX 1971 -1984FXR free USPS priority shipping on all us orders feel to contact with any questions...(December 20th, 2017)
• 16-0593 V-twin Manufacturing Fuel Transfer Tool (36.6% similar) Will not stall the engine while in use. Marketing, listing apps, application. Comes in its own small and compact storage pouch to be stored anywhere. Vt no: attaches to the stock check valve and allows fuel transfer from one bike another or use for draining tank seasonal storage. No modification ...(January 21st, 2017)
• Throttle 200t 16102-389-670 Cable Cb200t 200 Carburetor 16100-354-004 Set Twin Cb Cb200 Used Honda Carbs (19.1% similar) You are buying on a nice set of carbs carburetors off of a 1975 Honda CB200T. Ask any questions and happy buying. Posted with mobile. This is a very complete set including the throttle cables, just needs some inside cleaning...(September 13th, 2014)
• 170-0056 Stealth Chrome Airstream Air Cleaner Kit Harley Twin Cam Cycle (22.9% similar) Still in unopened wrapper. Bought it for my bike and never installed. Shipping is 20 to lower 48. Look up part number to be sure of your application big twin for carb model's. Brand news air cleaner others calculated by location...(September 29th, 2018)
• Cb200t Air Set Cb 200t Filter Twin Used 200 1976 1974 17300-354-005 17200-354-005 1975 Honda Cb200 (20.7% similar) Air box boxes air filter air box cover posted with mobile. Both air cleaners are complete with air cleaner elements, cases, and carburetor clips. Ask any questions. You are buying on a clean set of air filters right and left off of a 1975 CB200T...(October 4th, 2014)
• Ss Xl1200s 18-909 Twin Harley Sport Air Cleaner Arlen Ness 96-03 Sucker Blk (29.4% similar) ...(September 3rd, 2014)
• 9944 Kuryakyn Chrome Skull Air Cleaner Kit For 1999-2012 Harley Twin Cam Models (26.4% similar) All products are brand new and in original packaging...(January 12th, 2016)
• 2.055 V-twin Intake Manifold Flange (13.8% similar) Ask all questions prior to buying...(September 14th, 2017)