fits model: Rzr. make: Polaris. year: 2008–2010.

( Brand: Two Brothers Racing ), ( Manufacturer Part Number: 001-185 ), ( Part Type: Fuel Box Controller )
The Polaris RZR Box Controller Fuel 001-185 Juice Pro Racing Brothers, designed specifically for 2008-2010 RZR models, is an exceptional upgrade for your off-road vehicle. This fuel controller is not just a simple addition, but a comprehensive solution to optimize your RZR's performance.
Crafted by the renowned Brothers Racing, this Juice Pro Racing Fuel Controller is engineered to provide seamless control over your vehicle's fuel delivery system. It features a user-friendly, adjustable 0-100% fuel map that allows you to fine-tune your RZR's power output to suit your driving style and terrain.
The controller boasts a high-quality, waterproof design, ensuring reliability even in the most challenging off-road conditions. It's equipped with an LED display that shows real-time data, including fuel percentage and boost level, providing you with the necessary information to make informed decisions on the trail.
The Polaris RZR Box Controller Fuel 001-185 Juice Pro Racing Brothers is also compatible with various sensors, including MAP, Lambda, and Boost, enabling you to monitor and adjust various aspects of your RZR's performance. It's a must-have accessory for any RZR enthusiast looking to unlock their vehicle's full potential and take their off-road adventures to the next level.
Pros of buying a 2008-2010 RZR Box Polaris controller fuel 001-185 Juice Pro Racing Brothers:1. Enhanced Performance: This controller is designed to provide improved throttle response, better fuel efficiency, and increased horsepower. It can also help in reducing engine heat and prolonging the lifespan of the engine.
2. Customizable: The Juice Pro Racing Brothers controller allows for adjustable settings to suit different driving styles and terrains. It provides options for speed limiting, rev limiting, and ignition timing adjustments.
3. Easy Installation: The controller usually comes with a step-by-step installation guide, making it relatively easy to install even for beginners. It also does not require any modification to the original wiring harness, which can help maintain the vehicle's warranty.
4. Durable: The Juice Pro Racing Brothers controller is built to withstand harsh off-road conditions. It is usually waterproof and dustproof, ensuring its longevity.
Cons of buying a 2008-2010 RZR Box Polaris controller fuel 001-185 Juice Pro Racing Brothers:1. Cost: The controller can be quite expensive, especially when compared to the original factory controller. Some may find the price to be a deterrent.
2. Compatibility Issues: Although the controller is designed to work with specific models, there might be compatibility issues with certain vehicles or aftermarket modifications. It is essential to ensure compatibility before making a purchase.
3. Complexity: While the controller is designed to be user-friendly, some users may find the adjustable settings complex to understand and use effectively.
Conclusion:The 2008-2010 RZR Box Polaris controller fuel 001-185 Juice Pro Racing Brothers is a high-performance upgrade for Polaris RZR vehicles. It offers improved throttle response, better fuel efficiency, and increased horsepower. However, the price and potential compatibility issues are factors to consider before making a purchase.
Recommendation:If you are an avid off-road enthusiast looking for better performance and control over your Polaris RZR, the Juice Pro Racing Brothers controller could be a worthwhile investment. However, ensure that your vehicle is compatible and that you are comfortable with the adjustable settings before making the purchase.
Check all the joints on the exhaust system for any air leaks. A lit cigarette can be held around each joint to watch for air blowing the smoke around. This method gives us the details of the offer and all the contact history.
Both products can be used to put the right amount of fuel into the engine to maximize horse power and torque load and 8 leds indicates approx. There is no easy answer to this one. With any aftermarket exhaust system that is usually louder, the ignition of this mixture can be heard as popping. You can adjust how much fuel is added by each of these fuel circuits by pressing the mode button in order to enter the green, yellow or red adjustment modes.
However, the explanation of the adjustment modes in the instructions should give the user the knowledge they need to make adjustments. This can been seen on the juice box when you see the number 1 led flash green and the number 8 led flash red during deceleration, this means the injectors are off and no fuel adjustments can be made by the juice box. Only if there are noticeable performance problems, should you consider adjusting the juice box. There are 3 standard fuel circuits indicated by the three colors.
Uses oem connectors and high quality wiring harnesses. The juice box is pre programmed for the most common BR exhaust system fitted to each model. The BR slip on system is the most common and the juice box is pre programmed for the BR slip on system.
The full system settings are included in the juice box instructions. Green cruise, yellow acceleration, red full throttle. The colors can also be equated to carburetor tuning.
With any aftermarket exhaust system that is usually louder, the ignition of this mixture can be heard as popping. I get popping on deceleration. Riders can literally select between a BR power map, custom built maps, or even fine tune low, mid or high rpm ranges while sitting on the bike and without plugging in to a computer.
BR juice box costs BR quickly became addicted to the performance that hyper competitive Racing requires. Green cruise, yellow acceleration, red full throttle. The juice box calculates the engine load and adjusts the fuel curve based on the settings in each of the adjustment modes. If there is an exhaust leak, fresh air enters the exhaust stream and mixes with hot exhaust gases and unbent fuel and ignites causing the popping.
The BR slip on system is the most common and the juice box is pre programmed for the BR slip on system. The juice box calculates the engine load and adjusts the fuel curve based on the settings in each of the adjustment modes. Pre programmed with BR power maps specific to make, model and of BR exhaust and or BR pro filter. Any unbent fuel in the hot exhaust gases can mix with the fresh air and ignite in the pipe causing the popping in question.
The second most common cause for this condition is the fresh air system or post air injection aka pair system. Essentially, it is an intentional exhaust leak in order to burn off unbent fuel before it is released into the atmosphere. The user can only select what mode to make an adjustment.
Both products do a similar thing but in different ways. The juice box does not need to be adjusted because it is pre programmed to maximize the performance gains of a BR exhaust system. There are 3 standard fuel circuits indicated by the three colors. The colors can also be equated to carburetor tuning.
The juice box makes changes to the vehicles fuel curve in real time all the time based on these adjustments. However, it can be adjusted if other modifications to the vehicle require it. The injectors only turn back on if the throttle is opened or when the engine speed comes close to the engines idle speed in order to keep the engine from stalling.
Most modern vehicles turn their fuel injectors off during deceleration. Example search juice box pro controller juice box pro adds performance with map storage, computer optional full customization and the ultimate in PC based tuning capabilities to the proven juice box fuel management platform. Green pilot jet, yellow needle jet, red main jet.
The second most common cause for this condition is the fresh air system or post air injection aka pair system. The juice box instructions say it is programmed for my slip on and a stock filter but I have an aftermarket filter. You can see the differences between the juice box and juice box pro in the comparison chart above.
This is an emissions system that allows fresh air from the air box to be sucked into the exhaust stream right after hot exhaust gases exit the exhaust valve into the exhaust header. Both products can be used to put the right amount of fuel into the engine to maximize horse power and torque.
The color of the leds indicates what juice box fuel circuit is active. The juice box does not need to be adjusted because it is pre programmed to maximize the performance gains of a BR exhaust system. If the juice box is visible while the vehicle is being operated, the operator will notice that the juice box leds or lights will change colors and the number that are illuminated.
If the juice box is visible while the vehicle is being operated, the operator will notice that the juice box leds or lights will change colors and the number that are illuminated of the time, the juice box does not need to be adjusted. Select model's color matched only. They tweaked built, engineered and soon grew into a factory backed AMA super bike team delivering national championship winning race machines. Both products do a similar thing but in different ways.
It does not run in these modes nor can the user select what mode to run it in. However, the explanation of the adjustment modes in the instructions should give the user the knowledge they need to make adjustments.
The juice box should not be used to correct this issue as it will only create another problem in another part of the fuel curve. Computing power for racers and riders looking for the ultimate in precise adjustment and fuel map customization and creation, Two Brothers Racing's top tune software allows PC based power map creation at 250 rpm increments and 10 different throttle positions.
You can adjust how much fuel is added by each of these fuel circuits by pressing the mode button in order to enter the green, yellow or red adjustment modes. If a full system is fitted to a vehicle, the juice box will need to be adjusted for the full system. There is no easy answer to this one.
However, it can be adjusted if other modifications to the vehicle require it.
If there is an exhaust leak, fresh air enters the exhaust stream and mixes with hot exhaust gases and unbent fuel and ignites causing the popping. Is the juice box adjustable and for what reasons would I ever need to adjust it yes the juice box is adjustable. No computer necessary for top level fuel management. If a full system is fitted to a vehicle, the juice box will need to be adjusted for the full system.
The more their team built, the more people paid attention. The number that are illuminated indicates the engine load. Feel free to for more details. Is the juice box adjustable and for what reasons would I ever need to adjust it yes the juice box is adjustable.
BR juice box costs a lit cigarette can be held around each joint to watch for air blowing the smoke around.
Fully adjustable computer compatibility for ultimate tuning and penalization. The color of the leds indicates what juice box fuel circuit is active. Small, lightweight and easy to fit on the bike.
I get popping on deceleration.
For example 4 leds illuminated means the engine is approximately 50 loaded 6 leds indicates approx. This is an emissions system that allows fresh air from the air box to be sucked into the exhaust stream right after hot exhaust gases exit the exhaust valve into the exhaust header load. Popping does not occur during this time because there is no unbent fuel in the exhaust stream.
The juice box should not be used to correct this issue as it will only create another problem in another part of the fuel curve. Most modern vehicles turn their fuel injectors off during deceleration.
Only if there are noticeable performance problems, should you consider adjusting the juice box. A FAQ is not yet available for the juice box pro so we included this one for your reference.
Also, up to 10 pre programmed BR power maps custom made and Dino tested for each Two Brothers Racing exhaust system are adjustable to your preference. Any unbent fuel in the hot exhaust gases can mix with the fresh air and ignite in the pipe causing the popping in question.
The full system settings are included in the juice box instructions. Check all the joints on the exhaust system for any air leaks. Key benefits and features users can load up to 10 of their personally built power maps into the juice box pro and select between them while in the saddle eliminating the need to re boot with the computer every time a new map is desired.
About Two Brothers Racing in 1985, the Two Brothers Racing team hit the track and immediately knew they wanted more than stock components can deliver. The juice box instructions say it is programmed for my slip on and a stock filter but I have an aftermarket filter. Through BR's direct injector control, the fuel circuits on current sport bikes can be modified both richer and leaner than stock as much as to in any particular area of the power spread with the juice box pro. This can been seen on the juice box when you see the number 1 led flash green and the number 8 led flash red during deceleration, this means the injectors are off and no fuel adjustments can be made by the juice box.
The number that are illuminated indicates the engine load. The injectors only turn back on if the throttle is opened or when the engine speed comes close to the engines idle speed in order to keep the engine from stalling. Modification parameters vary upon make and model of machine and fuel changes made in these increments are automatically interpolated between the rpm and throttle position ranges ensuring a smooth final power curve. Popping does not occur during this time because there is no unbent fuel in the exhaust stream.
For example 4 leds illuminated means the engine is approximately 50 loaded 6 leds indicates approx. The juice box makes changes to the vehicles fuel curve in real time all the time based on these adjustments.
The user can only select what mode to make an adjustment.
Standard increments from selected map settings, different ranges are available using the supplied top tune software. It does not run in these modes nor can the user select what mode to run it in. Green pilot jet, yellow needle jet, red main jet. The juice box is pre programmed for the most common BR exhaust system fitted to each model.
BR parts, designs, and ideas became increasingly popular outside of the pits, as a result, their customer base grew rapidly.
Essentially, it is an intentional exhaust leak in order to burn off unbent fuel before it is released into the atmosphere of the time, the juice box does not need to be adjusted.